Novo Radikal 30 Gasolina

Posted on outubro 12 2010 by BH Helimodelismo

Enquanto a Align não fala nada se entra ou não no mercado dos modelos a gasolina, a Century Helicopters que é famosa neste segmento lança o novo Radikal G30



  • Semi-metal rotor head with two types of hard dampeners. (for 690-710mm Main blades) For 3D maneuver.
  • Aluminum triple bearing metal swash plate with zero-slop bearing design.
  • Black modular G-10 side frames with aluminum ridge frame enforcements provides vibration dampening and a multi-point supported solid frame design.
  • Designed for light weight, super rigidity, easily build process, and low maintenance.
  • Top quality ball bearings, thrust bearings and one way bearing.
  • Aluminum bearing blocks with double upper main shaft bearing and extra thrust bearing.
  • Heavy Duty double bearing supported and double NSK One-way bearing autorotation design with extra large aluminum lower bearing support to provide no power lose and increased life.
  • Advanced 4-point supported engine mounts for less vibration and highest rigidity.
  • Adjustable gear ratios available: 6.0, 6.42 and 6.92.
  • Designed to be powered by Zenoah G231, G26 or after market G27 and G30 modified gasoline engines. This side frame design accepts up to 4 BHP power output.
  • Extra large clutch and clutch bell with Heavy Duty one way starter design to provide 100% power transfer.
  • Advanced intake/exhaust cooling fan system and specially designed fan cover for maximum efficiency to cool the engine.
  • Machined POM Main Gear and DuPont™ plastic parts.
  • Automotive grade tail drive belt supported by aluminum timing pulley and idler pulley along with double bearing supported aluminum tail bearing coupler.
  • Carbon adjustable tail pitch control rod.
  • High Gloss white fiberglass painted canopy (Black windshield and white body).
  • Heavy duty landing gear.

Features (Carbon edition):
Light weight fully carbon fiber side-frames, tail fins with rigid aluminum frame enforcements.
Metal center hub along with two different hard dampeners. For hot 3D maneuvers.
Aluminum tail gear box.
Carbon tail boom supports with aluminum ends.
Aluminum fly bar control arm set.
Aluminum seesaw control arms.

Length: 55 inch / 1397 mm
Height: 17 inch / 432mm
Main Rotor Diameter: 62.2 inch / 1580 mm (with optional RotorTech™ 710mm)
Tail rotor diameters: 11.1 inch / 282.5 mm (with optional RotorTech™ 105mm)
Engine: Zenoah™ Z-231, 26 or Modified Z-27 and Z-30 gasoline engine.
Start method: Top Hex start or Optional pull start.
Dry Weight: approximately 5 kg / 11 lbs. when full load tested with 5 Futaba digital servos, Futaba 611 Gyro, Futaba 2.4G receiver, Li-Po Receiver battery and Century 3D Torpedo Slim Muffler.

Just Provide ( Items required to fly but not included ):
1x 690mm-710mm Main Blades.
1x 6-Channel or better Radio Transmitter system capable of 120 degree eCCPM mixing.
(7 Channels or better recommended, for governor)
1x 6-Channel or better Receiver and Receiver Battery.
(7 Channels or better recommended, for governor)
1x Zenoah Z-231, 26 or Modified Z-27 and Z-30 gasoline engine.
1x Muffler.
5x Sport line or better Servos.
1x Gyro. (Heading Lock/Hold recommended)
1x Governor (optional but recommended)
1x Crystal Set. (if using non-2.4GHz radio sytem)
1x 87 to 92 Octane Gasoline.
1x 2-Stroke Motor Oil.
1x Synthetic Oil/Grease.
1x Pull Start System or Starting Equipment.
1x RC Helicopter Tools.

Be Sociable, Share!

Uma resposta para “Novo Radikal 30 Gasolina”

  1. claudio disse:

    ola quero saber se posso conpra este helicoptero no brasil

Deixe uma resposta